X5A 2.5 inch SATA SATAIII - Industrial Grade SSD

Renice X5A SATA MLC/ SLC SSD is SATAIII 6Gb/s MLC and SLC based solutions for high performance, cost sensitive and high capacity markets. Features excellent high performance, especially in random data transfer rate, and power failure protection, HW and SW secure erase functions, AES encryption and OPAL 2.0 compliant, making it an ideal solution for variety of applications, including enterprise solutions that need a large amount of data input and output, as well as in high shock and vibration environment of industrial and military equipment.

Basic Information
Standard Serial ATA	SATA III, 6.0Gbps (Backward compatible with SATA 1.5 and 3.0Gbps)
Form Factor	2.5-inch (100.0mm x 70.0mm x 9.5mm/7.0mm) L×W×H
Connector	7+15 pin
Capacities	32GB~1TB (MLC SSD); 32GB~512GB (SLC SSD)
Input Voltage	5V (±5%)
Type	Industrial SSD
Performance
Max Sequential Data Read/Write	540/440MB/s
Access Time	<0.1ms
MTBF	>3,000,000 hours @25c
Flash Memory Management
Lash Management Algorithm	Static and dynamic wear-leveling, bad block management algorithm
Dynamic Power Management and SMART	√
BCH ECC	66bits in 1KBytes
Other Functions
Power Failure Protection	√
Secure Erase	Optional
Physical Destruction	Optional
TRIM	√
AES Encryption, OPAL 2.0 Complian	√
Environment
Operation	Operation: -40°C to +85°C; Storage: -50°C to +95°C
Humidity	5-95%
Vibration	10Hz-2000Hz, 16.4 G (X, Y, Z axis, 1 hour /axis)
Shock	Peak Acceleration: 1,500 G, 0.5ms(Half-sine wave, ±X,±Y,±Z axis, 1 time/axis); Peak Acceleration: 50 G, 11ms(Half-sine wave, ±X,±Y,±Z axis, 3 times/axis)

Document

· Renice X5A 2.5 SATAIII SSD DATASHEET V1.4.pdf

2022-05-23 699.06KB

Request for Quote