Renice Industrial 2.5 SATA SSD with rugged SATA connector
Rugged SSD Solution: Renice 2.5 Rugged SATA SSD
Renice 2.5
X9 2.5 inch R-SATA SSD
X9 series 2.5 inch R-SATA industrial grade SSD is a high-end storage device designed for industrial, automotive electronics, medical equipment, aviation, navigation and other special applications. Renice 2.5" R-SATA Solid-state Drive uses a Rugged SATA connector, further optimize the interface connections, namely 360° direction connection in the vibration environment, so no data reliability problem happens due to poor contact by gold finger. X9 R-SATA SSD is especially suitable for application in high vibration and shock environments.
Basic Information
Interface SATA 6.0Gbps (Backward compatible with SATA 1.5 and 3.0Gbps)
Dimension 2.5 inch (100.0mmX70.0mm9.5mm) L×W×H
Form Factor R-SATAIII 7+15 pin
Capacity 512GB~ 2TB (MLC SSD); 256GB~1TB (SLC SSD)
Input Voltage 5V (±5%)
Type Industrial SSD
Max Sequential Read/Write 500/500MB/s
Read/Write IOPS 75,000 / 65,000
Access Time <0.1ms
Flash Memory Management
Flash Management Algorithm Static and Dynamic Wear-leveling of Renice® Non-Balance Wear Levelingtechnology, Bad Block management algorithm
SMART (Self-Monitoring, Analysis and Reporting Technology)
BCH ECC 8~80bits in 512Bytes or 1KBytes
Other Functions
Power-off Protection
TRIM (need OS support)
AES-128/256 bits
Interface Power Management
Spread-Spectrum Clocking
Dynamic Power Management
Temperature Range Operating: -40 to +85°C; Storage: -50 to +95°C
Humidity 5-95%
Vibration 10Hz-2000Hz, 16.4 G (X, Y, Z axis, 1 hour /axis)
Shock Peak Acceleration: 1,500 G, 0.5ms (Half-sine wave, ±X,±Y,±Z axis, 1 time/axis); Peak Acceleration: 50 G, 11ms (Half-sine wave, ±X,±Y,±Z axis, 3 times/axis)
· RENICE X9 2.5 INCH R-SATAIII SSD Datasheet V1.0.pdf

If you have a question or need a quote, please leave your message. We'll get back to you as soon as possible.

Get Quotes
Get Quotes

We use cookies to help us improve our webpage. Please read our Cookie Policy.

Ok Block Cookie