Renice Industrial 2.5 SATA SSD with rugged SATA connector

X9 2.5 inch R-SATA SSD

X9 series 2.5 inch R-SATA industrial grade SSD is a high-end storage device designed for industrial, automotive electronics, medical equipment, aviation, navigation and other special applications. Renice 2.5 inch R-SATA Solid-state Drive uses a Rugged SATA connector, further optimize the interface connections, namely 360° direction connection in the vibration environment, so no data reliability problem happens due to poor contact by gold finger. X9 R-SATA SSD is especially suitable for application in high vibration and shock environments.
Basic Information
InterfaceSATA 6.0Gbps (Backward compatible with SATA 1.5 and 3.0Gbps)
Dimension2.5 inch (100.0mmX70.0mm9.5mm) L×W×H
Form FactorR-SATAIII 7+15 pin
Capacity512GB~ 2TB (MLC SSD); 256GB~1TB (SLC SSD)
Input Voltage5V (±5%)
TypeIndustrial SSD
Performance
Max Sequential Read/Write 500/500MB/s
Read/Write IOPS 75,000 / 65,000
Access Time <0.1ms
Flash Memory Management
Flash Management AlgorithmStatic and Dynamic Wear-leveling of Renice® Non-Balance Wear Levelingtechnology, Bad Block management algorithm
SMART (Self-Monitoring, Analysis and Reporting Technology)√
BCH ECC8~80bits in 512Bytes or 1KBytes
Other Functions
Power-off Protection √
TRIM (need OS support)√
AES-128/256 bits√
NCQ√
Interface Power Management√
Spread-Spectrum Clocking√
Dynamic Power Management√
Environment
Temperature RangeOperating: -40 to +85°C; Storage: -50 to +95°C
Humidity5-95%
Vibration10Hz-2000Hz, 16.4 G (X, Y, Z axis, 1 hour /axis)
ShockPeak Acceleration: 1,500 G, 0.5ms (Half-sine wave, ±X,±Y,±Z axis, 1 time/axis); Peak Acceleration: 50 G, 11ms (Half-sine wave, ±X,±Y,±Z axis, 3 times/axis)