X5A 1.8 micro-SATA SATAIII

Renic X5A 1.8" micro-sata SSD is a high-capacity SSD solution that supports up to 540MB/s read and 440MB/s write performance via the SATAIII 6.0Gbps interface. At the same time adopt SLC/MLC NAND flash memory technology and unique firmware purchased, maximum limit increased the SATAIII bandwidth limitations, providing 75000 data input/output operations per second (IOPS), is the ideal choice of the various applications, including enterprise solutions that need a lot of data input and output, as well as in high shock and vibration environment of industrial equipment. In addition, X5A disk has comprehensive data management technology, including TRIM, NCQ, SMART management, 256-bit AES data encryption technology, anti-write technology and power loss protection technology, etc., which can achieve data encryption and protection according to customer needs.

Basic Information
Standard Serial ATA:	SATA III, 6.0Gbps (Backward compatible with SATA 1.5 and 3.0Gbps)
Form factor:	1.8-inch (78.5.0mm x 54.0mm x 5.0mm) L×W×H
Connector:	7+7+2 pin
Density:	16GB~1TB (MLC) 8GB~512GB (SLC)
Input voltage:	3.3V /5V (±5%)
Performance:
Max Sequential Data Read/Write:	550MB/400MB/s
Access Time:	<0.1ms
MTBF:	>3,000,000 Hours @25C
Data retention:	JESD47 compliant
4Kb Random Read/Write IOPS:	70,000 / 75,000
Flash Memory Management
Flash management algorithm:	static and dynamic wear-leveling, bad block management algorithm
Dynamic power management and SMART:	√
BCH ECC:	66bits in 1KBytes
Other Functions
Power Failure Protection	√
Over Voltage Protection	√
TRIM	√
NCQ	√
Secure Erase	optional
Environment
Temperature ranges:	- Operation: -40°C to +85°C - Storage: -50°C to +95°C
Humidity:	5-95%
Vibration：	10Hz-2000Hz, 16.4 G (X, Y, Z axis, 1 hour /axis)
Shock ：	Peak Acceleration: 1,500 G, 0.5ms(Half-sine wave, ±X,±Y,±Z axis, 1 time/axis) Peak Acceleration: 50 G, 11ms(Half-sine wave, ±X,±Y,±Z axis, 3 times/axis)

Document

· RENICE X5A 1.8 micro-SATA SATAIII DataSheet V1.1.pdf

2020-05-06 585.24KB

Request for Quote