Reliability study
Renice SNST-SF103-C1I1 is a domestic BMC daughter card based on CS32F103, which can realize CHMC/IPMC function. The daughter card integrates a wealth of interfaces: 100M network interface (MDI interface), JTAG debug interface, general GPIO interface, IPMB interface, Local BUS communication interface, with the functions of chassis and cabinet identification and ADC acquisition interface, etc.
Renice · 2022-10-17Renice SNST-SA2400-C1I2 is a board-level CHMC daughter card, with the chip AST2400 produced by ASPEED on board. The BMC daughter card periodically collects sensor information on the carrier board, including sensor information such as current, voltage, and temperature. It supports functions such as remote power-on or restart of each blade of the whole machine, and remote update of the firmware of the daughter card itself. As a CHMC daughter card, it can realize the whole machine health management function, the whole machine log management, the whole machine sensor history record management and the main and standby arbitration functions based on the network or UART.
Renice · 2022-10-17Renice SPMC-SA2400-C1I1 is a BMC daughter card. The daughter card outputs 1x Gigabit network interface and is connected to the Gigabit switch chip. External output 1x 100M debugging network interface, external output 2 channels + 8 channels (optional) IPMB (I2C) interface and do isolation processing (I2C BUFFER), support IPMI2.0 standard communication protocol, communication rate supports 100Kbps/400Kbps configurable.It can control the power on and off of other blades through IPMI commands, and has the functions of fault reporting, power-on self-check, and running status self-check. It has a software interface that outputs information such as current, voltage, main chip temperature (including CPU, 40G switching chip), firmware version (if any) to user software. It collects and manages the monitoring information of each blade of the whole machine, and can provide independent state monitoring of the whole machine.
Renice · 2022-10-17Renice High reliable SATA connector is designed for harsh environments and rugged storage applications within the aerospace, defense, maritime and industrial market segments. Typically used in industrial SSDs.
Renice · 2022-10-10In general, SSD data destruction is divided into two types. One is Logical Destruction which only destroys the data but not the physical chipsets. SSD is reusable after data-destructing or firmware re-implanting. Logical Destruction is normally executed by two modes. Another type is Physical Destruction with chipsets inside burned directly, that the data recovery is impossible in this way. Physical Destruction generally utilizes the following methods: crushed by hammer or other heavy stuff, destructed by strong acid, destroyed by explosive or burned the chipsets by high voltage.
Renice · 2022-09-14