Reliability study
Considering the SSD must be based on FTL to realize the data transfer between logical address and physical address, if there happens abnormal power-off in case of normal operation (read/ program/ erase), it may lead the loss of mapping table which has not finished updating and resulting in the SSD failed to be detected by the host. Meanwhile, to improve the read/write performance, SDRAM is normally adopted as buffer on SSD board. The abnormal power-off also can cause the loss of data or updated mapping table which have not been written into NAND Flash from SDRAM.
The article introduces SSD failure problem caused by abnormal power-off, typical method of power-failure protection, and test principles and key points of SSD Power-off Protection.
ERIC · 2019-04-10LSB (Least Significant Bit) and MSB (Most Significant Bit) are actually two bits in the same cell of a MLC NAND Flash, LSB is relative to Lower Page and MSB is associated to Upper Page. As the Lower Page is programmed first, the Upper Page has higher requirements for the voltage accuracy during programming. Programming the Upper Page is slow and inevitably causes influences or even errors to Lower Page. And in theory programming the Lower Page certainly has effects on the Upper Page.
ERIC · 2019-04-10rBackup (Rapid Backup) refers to a technique of how to flush data stored in DDR into NAND Flash within a very short period. It is developed by Renice to solve the problem that a regular power failure protecting mechanism (based on a supercapacitor or tantalum capacitor) does not work when the capacitor ages with power less than the initial design as time goes by.
ERIC · 2019-04-09Renice NFA100-E is an extremely powerful and flexible NAND Flash testing platform specially developed for R&D personnel, whereby they can extract NAND Flash parameters in a maximal way by using NFA100-E NAND Flash tester system commands and even reprocess these parameters for eventual product development. User can also realize their specific testing requirements through API or usage of script commands.
ERIC · 2019-04-09In order to extend the life cycle of NAND flash by avoiding some blocks being frequently erased and becoming bad blocks rapidly, while the existence of other less erased blocks will cause an unbalance Program/Erase situation that shorten the overall SSD product life as a drawback. There are various Wear-Levelling algorithms and Garbage Collection strategies raised by NAND flash practitioner as strategy to avoid these potential problems.
ERIC · 2019-04-09