Renice X10B 2.5” SATA SSD adopts advanced NAND management technology improves the endurance of industrial SSD, enhances data security, and helps prevent data corruption during unexpected power failure events. X10B 3D TLC SSD combines robust NAND controller hardware error correction capabilities with advanced wear-leveling algorithms, and bad block management to improve data reliability and significantly extend the life of the SSD product. Renice X10B industrial SSD is an ideal storage solution for industrial computers, navigation systems, test and measurement instrumentation, security and surveillance equipment, digital signage and networking systems.
Basic Information
Standard Serial ATA
SATA III, 6.0Gbps (Backward compatible with SATA 1.5 and 3.0Gbps)
Form Factor
2.5-inch (100.0mm x 70.0mm x 7.0mm) L×W×H
Connector
7+15 pin
Capacities
2TB~4TB (3D-TLC SSD)
Input Voltage
5V (±5%)
Type
Industrial SSD
Performance
Max Sequential Data Read/Write
550/520MB/s
Access Time
<0.1ms
MTBF
>1,500,000 hours @25C
Flash Memory Management
Flash Management Algorithm
Static and dynamic wear-leveling, bad block management algorithm
SMART (Self-Monitoring, Analysis and Reporting Technology)
√
Other Functions
Support Power Failure Protection
√
Support Secure Erase (optional)
√
AES Encryption, TCG OPAL2.0 (optional)
√
Thermal Adaptive Function
√
Support TRIM
√
Environment
Operation
-40°C to +85°C
Storage
-50°C to +95°C
Humidity
5-95%
Vibration
20G (196 m/s2) Peak, 20Hz~2000Hz, (30 min per axis) x3 axis