X9 2.5" SATA SSD - Mission SSD

Renice Industrial 2.5 SATA SSD with rugged SATA connector

Rugged SSD Solution: Renice 2.5 Rugged SATA SSD

Renice X9 2.5" SATA SSD is a high-end SSD Solution for a variety of applications, including industrial, automotive electronics, medical equipment, aerospace and maritime industry, as well as enterprise solutions where data throughput needs to be high. Utilizing the unique firmware architecture, Renice industrial grade 2.5 SATA SSD provides high reliability and durability. Besides, over-voltage protection, sudden power loss protection, AES 128bit/256bit Encryption and multiple Secure Erase according to customer’s applications, all these features make Renice industrial SSDs the first choice for critical mission applications.

Basic Information
Interface	SATA III, 6.0Gbps/SATA II, 3.0Gbps
Dimension	2.5 inch (100.0mmX70.0mm9.5mm) L×W×H
Form Factor	R-SATAIII 7+15 pin
Capacity	256GB~ 4TB (MLC SSD); 128GB~1TB (SLC SSD)
Input Voltage	5V (±5%)
Type	Industrial SSD
Performance
Max Sequential Read/Write	530/500MB/s
Access Time	<0.1ms
Read/Write IOPS	>25 years @ 100GB write/ day (32GB SLC SSD)
Flash Memory Management
Flash Management Algorithm	Static and Dynamic Wear-leveling of Renice® Non-Balance Wear Levelingtechnology, Bad Block management algorithm
SMART (Self-Monitoring, Analysis and Reporting Technology)	√
BCH ECC	80-Bit /1KBytes
Other Functions
Power-off Protection	√
TRIM (need OS support)	√
AES-128/256 bits	√
Interface Power Management	√
Spread-Spectrum Clocking	√
Dynamic Power Management	√
One-click Self-destruct	√
Environment
Temperature Range	Operating:-40 to +85°C; Storage: -50 to +95°C
Humidity	5-95%
Vibration	10Hz-2000Hz, 16.4 G (X, Y, Z axis, 1 hour /axis)
Shock	Peak Acceleration: 1,500 G, 0.5ms

Document

· RENICE X9 2.5 SATA3 datasheet v1.0 .pdf

2019-06-04 968.05KB

Request for Quote