Renice Industrial 1.8 micro-SATA SSD

X5A 1.8 micro-SATA SSD

Renice X5A 1.8" Micro SATA Industrial SSD is a high capacity SSD solution that supports up to 540MB/s read and 440MB/s write performance via the SATAIII 6.0Gbps interface. 1.8 Micro SSD adopting SLC/MLC NAND flash memory technology and unique firmware purchased, maximum limit increased the SATAIII bandwidth limitations, providing 75000 data input/output operations per second (IOPS). Industrial 1.8" Micro SATA SSD is the ideal solution for various applications, including enterprise solutions that need a lot of data input and output, as well as in high shock and vibration environments of industrial equipment. In addition, Renice 1.8 Micro SATA Disk has comprehensive data management technology, including TRIM, NCQ, SMART management, 256-bit AES data encryption technology, anti-write technology and power loss protection technology, etc., which can achieve data encryption and protection according to customer needs.
Basic Information
Standard Serial ATASATA III, 6.0Gbps (Backward compatible with SATA 1.5 and 3.0Gbps)
Form Factor1.8-inch (78.5.0mm x 54.0mm x 5.0mm) L×W×H
Connector7+7+2 pin
Capacities16GB~1TB (MLC SSD); 8GB~512GB (SLC SSD)
Input Voltage3.3V /5V (±5%)
TypeIndustrial SSD
Performance
Max Sequential Data Read/Write550MB/400MB/s
Access Time<0.1ms
MTBF>3,000,000 Hours @25C
Data RetentionJESD47 compliant
4Kb Random Read/Write IOPS 70,000 / 75,000
Flash Memory Management
Flash Management AlgorithmStatic and dynamic wear-leveling, bad block management algorithm
Dynamic Power Management and SMART√
BCH ECC66bits in 1KBytes
Other Functions
Power Failure Protection √
Over Voltage Protection√
TRIM√
NCQ√
Secure EraseOptional
Environment
Temperature RangesOperation: -40°C to +85°C; Storage: -50°C to +95°C
Humidity5-95%
Vibration10Hz-2000Hz, 16.4 G (X, Y, Z axis, 1 hour /axis)
ShockPeak Acceleration: 1,500 G, 0.5ms(Half-sine wave, ±X,±Y,±Z axis, 1 time/axis); Peak Acceleration: 50 G, 11ms(Half-sine wave, ±X,±Y,±Z axis, 3 times/axis)