4TB Renice 2.5 SAS industrial SSD

X9 2.5 inch SAS SSD

Renice X9 series 2.5 inch SAS industrial grade Solid-state Drive is a high-end product for special applications in industry, automotive electronics, medical equipment, aviation and navigation, etc. Renice SAS SSD's interface adopts dual-port design, dual-control and dual-activity design which provides more secure application guarantee in case of a host failure, the backup host can switch to work seamlessly in real-time, it is the best choice for highly reliable server and storage array. Renice 2.5" SAS Industrial SSDs capacity up to 4TB, Read/Write speed over 500MB/S, it is based on an excellent SSD controller algorithm, equipped with overvoltage and overcurrent protection functions, and provides a variety of special and customized functions such as AES encryption, Secure Erase, one-key Physical Destruction and one-key Logical Destruction.
Basic Information
InterfaceSAS 6.0Gbps (Backward compatible with SAS 1.5 and 3.0Gbps)
Form Factor2.5 inch (100.0mmX70.0mm9.5mm) L×W×H
Connector7+7-pin signal segment and a 15-pin power segment
Capacity256GB~ 4TB (MLC SSD); 128GB~1TB (SLC SSD)
Input Voltage5V (±5%)
TypeIndustrial SSD
Performance
Max Sequential Data Read/Write500/500MB/s
Read/Write IOPS75,000 /65,000
Access Time<0.1ms
Flash Memory Management
Flash Management AlgorithmStatic and Dynamic Wear-leveling, Bad Block Management Algorithm
SMART (Self-Monitoring, Analysis and Reporting Technology) √
BCH ECC8~80bits/512Bytes or 1KBytes
Other Functions
Power-off Protection√
TRIM (need OS support)√
AES-128/256 bits√
NCQ√
Interface Power Management√
Spread-Spectrum Clocking√
Dynamic Power Management√
Environment
Temperature RangeOperation:-40 to +85°C; Storage: -50 to +95°C
Humidity5-95%
Vibration10Hz-2000Hz, 16.4 G ((X, Y, Z axis, 1 hour /axis)
ShockPeak Acceleration: 1,500 G, 0.5ms(Half-sine wave, ±X,±Y,±Z axis, 1 time/axis); Peak Acceleration: 50 G, 11ms(Half-sine wave, ±X,±Y,±Z axis, 3 times/axis)