Renice M.2 SSD is a high capacity industrial grade NGFF SSD solution

X5A M.2 2280 SATAIII SSD

Renice X5A M. 2 SSD is a high capacity industrial grade NGFF SSD solution. With unique firmware architecture, maximizing SATAIII bandwidth limits and delivers excellent Read/Write performance 500/440MB/s, equipped with 512MB DDR-1600. With adopting SLC/ MLC NAND Flash technology, and utilizing a unique firmware architecture, Renice industrial M.2 SSD maximizes the bandwidth limitations of SATAIII providing up to 75,000 IOPS. Renice M.2 2280 SSD is an ideal solution for a variety of applications, including enterprise solutions that require large amounts of data input and output, and industrial equipment in high shock and vibration environments.
Basic Information
Standard Serial ATASATA III, 6.0Gbps (Backward compatible with SATA 1.5 and 3.0Gbps)
Form FactorM.2 2280(NGFF) 80.0mm x 22.0mm x 3.65mm (L x W x H)
Connector75pin SATA-based M.2 pinout
Capacities 32GB~512GB (MLC SSD); 16GB~128GB (SLC SSD)
Power ManagementInput voltage: 3.3V (±5%); Support Hot Plug/Removal Function
TypeIndustrial SSD
Performance
Max Sequential Data Read/Write 500MB/440MB/s 
Access Time<0.1ms
MTBF>3,000,000 Hours @25C
4Kb Random Read/Write IOPS 70,000 / 75,000
Flash Memory Management
Flash Management AlgorithmStatic and dynamic wear-leveling, bad block management algorithm
Supports Dynamic Power Management and SMART √
BCH ECC66-Bit /1KBytes
Other Functions
Power Failure Protection√
Over Voltage Protection√
AES 256bit EncryptionOptional
TRIM√
Environment
Temperature RangesOperation: -40 to 85°C; Storage: -50 to 95°C
Vibration5-95%
ShockPeak Acceleration: 1,500 G, 0.5ms(Half-sine wave, ±X,±Y,±Z axis, 1 time/axis); Peak Acceleration: 50 G, 11ms(Half-sine wave, ±X,±Y,±Z axis, 3 times/axis)