PCIe accelerated Computing Card of 4-way 100G Optical Fiber based on ZU19EG

This card is designed based on Xilinx Zynq UltraScale+ MPSOC series SOC XCZU19EG-FFVC1760 architecture and supports PCIE Gen3x16 mode. Among them, the arm is equipped with a group of 64-bit DDR4 with a total capacity of 4GB, which can run stably in 2400MT/s, and the PL terminal supports two groups of 64-bit DDR4, each with a capacity of 4GB, with a maximum operating speed of 2666MTUnites; the card has an automatic power-up sequence and supports a variety of startup modes, such as Nor Flash startup, EMMC startup, SD card startup and so on. The card supports 1-way USB3.0 interface, 1-way Gigabit Ethernet interface, 1-way DP output interface, 2-way debug serial port (RS232), 2-way Can interface, and 4-way QSFP28 interface, supporting 100G data transmission rate. The PL side extends a standard FMC HPC interface to support 8-way GTH interface and LA/HA/HB fully defined interface. The design of the card meets the industrial requirements and can be used in high-speed signal processing, vehicle radar signal processing and other fields.

Specifications

PL End Specification

FMC2-way FMC HPC,ASP-134486-01 8-way GTH,LA definition per route
Optical fiber4-way QSFP28+, can be configured with 100G, 40G Ethernet, Aurora, RapidIO protocols
DDR4Two groups of 64 MetabitUnites, 4GB, 4GB, and 2400 MTS
PCIe Gen3 x16Support for PCIe3.0 protocol
IO8 x 3.3V IO

PS End Specification

DDRDDR4,64-bit/4GB,2400MT/s
QSPI FlashQSPI x2 NorFlash, capacity 512Mb per chip
EMMC32GB
SD Card16GB SD card
CAN 2-way CAN
Display PortSupport Display Port 1.2a protocol standard, only support external output
USB1-way USB3.0
Network1-way Gigabit Ethernet, RJ45 interface
RS2322-way RS232 debug serial port

Other Specification

SizeStandard PCIe
Power supplyVoltage: + 12VDC ±10% 5A
Power consumption60W
Operating temperatureIndustrial -20℃~+65℃

Downloads