The CameraLink rotary fiber data forwarding card based on KINTEx-7 XC7K160T

The board card is a CameraLink (Full) to four-channel optical fiber interface board, which can realize the conversion of image signals from the 1-channel CamerLink Full mode to the four-channel SFP+ ten-gigabit optical fiber interface. The board card has one gigabit Ethernet port, one RS232/RS422/RS485 communication interface, and the board card has double-channel indicator light. The board card has low power consumption, it can be used in video image transmission and other scenes.

Specifications

Specificaiton

The main processorKintex-7 series FPGA XC7K160T-2FFG676
Camera linkMDR connector,one channel input, support Base, Middle, Full format, 8Byte input
Four channel optical fiberMaximum support for 10Gbps/lane line rate. Wide temperature SFP+ interface Aurora and RapidIO protocols can be supported
DDROne set of 64-bit two GByte DDR3 SDRAM memory, which can realize high-speed data cache with 800MHz clock rate, theoretical bandwidth as high as 6.4GByte/s, and DDR3 SDRAM reading and writing efficiency as high as 90%.
Gigabit EthernetOne channel
RS422One channel, can be flexibly configured into RS232 or RS485 mode.
SPI Flashone piece of 64MByte SPI Flash, used for loading FPGA.
LED Indicator lightFour front panel output for easy debugging and status display
JTAGDebug portOne
Size175X110X20mm
Power supply+12V@2A
Power consumption10W
Working temperatureIndustrial -20℃ to +70℃

Software support

The main processorXC7K160T-2FFG676
Version of the softwareISE14.7
Programming languageVerilog
Test programProvide DDR3 SDRAM interface test program.
Test programProvide optical fiber interface test program (Aurora64B /66b, line rate 6.25Gbps).
Test programProvide gigabit Ethernet interface test program.
Test programProvide RS422 interface test program.
Test programProvides the CameraLink input interface test program.

Downloads