
Two-channel QSFP+ fiber transceiver subcard based on FMC
This card is an FPGA sandwich card (FMC) module, which can provide up to 2 QSFP/QSFP + module interfaces and plug directly into a Celines FPGA with gigabit level transceiver (MGT). Support the use of Spartan-6, Virtex-6, Kintex-7, Virtex-7FPGA series FPGA. Compatible with Xilinx development board. Realize the high-speed serial (fiber or copper wire) connection to the FPGA MGT interface. The two QSFP cages support two QSFP/QSFP + transceiver modules. Support a wide range of SFP and SFP + transceivers with signal transfer rates up to 10Gb/ SEC.
Specifications
QSFP+ Optical fiber Parameters
| Channel | Two channel |
|---|---|
| GTX channel | Eight channel |
| Single channel rate | 2.5Gbps,3.125Gbps,6.25Gbps,10Gbps |
| Support agreement | Aurora,RapidIO,40G Ethernet |
| Digital interface | FPGA GTX LVDS |
| Clock Channel amount | Two channel |
| Clock On-board crystal | 156.25MHz |
| FMC-HPC Connector | ASP-134488-01 |
| Front board | Two channel QSFP+,multi mode or single mode |
| Standard | FMC ANSI/VITA 57.1 - 2008 |
| Size | 69X76.5mm |
| Power supply | +12V@1A |
| Power consumption | 8W |
| Working temperature | Industrial -20℃ to +70℃ |
| Xilinx board | V6、V7、KU、VU、 ZYNQ、ZU development board |
| Orihard board | 136、270、367、288、330、274、3、9 |