
Full Camera Link output card compatible with 1.8V IO based on FMC
The Full Camera Link output sub-card based on FMC compatible with 1.8V IO supports Base, Middle and Full Camera Link signal output, and is compatible with 1.8V, 2.5V and 3.3V IO FPGA signal output. Adapt xilinx development boards of different models and FMC boards within the company. Board card is suitable for professional image application, analog source output and so on.
Specifications
Camera link Output Parameters
| Chip type | SN65LVDS93A |
|---|---|
| Channel amount | One channel base on Middleor Full One channel uart;Four channel cc |
| Clocking rate | 85Mbps |
| Data bits wide | Maximum 8Byte |
| Transfer impedance | The differential100Ω |
| Connector | Two channel SDR26 |
| FMC signal IO type | LVTTL |
| FMC signal Electrical level | 1.8V,2.5V,3.3V |
| IO | 8 |
| RS485/RS232 | One channel |
| Connector | Pin board |
| FMC-HPC | ASP-134488-01 |
| Front board | Two channel SDR26 |
| Standard | FMC ANSI/VITA 57.1 - 2008 |
| Size | 69X76.5mm;The mounting hole size: 2.7mm |
| Power supply | +3.3V@0.5A |
| Power consumption | 2W |
| Working temperature | Industrial -20℃ to +70℃ |
| Xilinx board | V6、V7、KU、VU、 ZYNQ、ZU development board |
| Orihard board | 136、270、367、288、330、274、3、9 |