A Full Camera Link input card compatible with 1.8V IO based on FMC

This board card is specially designed to consider compatibility with 1.8V level IO, Virtex7, Kintex Ultrascale, and Virtex Ultrascale + FPGA, and hardware parameters can also be modified if compatible with the original 3.3V. The board card supports one channel Full Camera link input and one channel HDMI output.

Specifications

Camera link Input Parameters

Chip typeDS90CR288A
Channel amountOne channel base、Middle or Full One channel uart;four channel cc
Rate 85Mbps
Video Maximum 8Byte
Transfer impedanceThe differential 100Ω
Connector Two channel SDR26
FMC signal IO typeLVTTL
LVTTL1.8V,2.5V,3.3V
HDMI Input Channel amountOne channel
Connector HDMI
FMC-HPCASP-134488-01
Front boardTwo channel SDR26 one channel HDMI
StandardFMC ANSI/VITA 57.1 - 2008
Size 69X76.5mm; mounting hole size : 2.7mm
Power supply+3.3V@0.5A
Power consumption2W
Working temperatureIndustrial -20℃ to +70℃
Xilinx boardV6、V7、KU、VU、 ZYNQ、ZU development board
Orihard board136、270、367、288、330、274、3、9

Downloads