
Dual-channel QSFP+ fiber PCIe card based on kintex UltraScale XCKU060
This card is based on the Xilinx UltraScale Kintex series FPGA XCKU060-FFVA1156-2-I architecture, it supports the high-speed signal processing board of PCIE Gen3 x8 mode, with two 40G QSFP+ interfaces, two channels of 64-bit DDR4, each channel has a capacity of 8Gbyte, and can run stably at 2400MT/s. The card has the characteristics of automatic power on sequence, BPI mode fast program loading, and supports two system clock access modes in and out of the board, etc. The design meets the requirements of industrial level. This card can be used for high speed signal processing.
Specifications
Specification
| Main processor | XCKU060-FFVA1156-2I |
|---|---|
| Standard | PCI EXPRESS CARD SPECIFICATION, REV. 1.1 |
| Electrical | PCIe 2.0、3.0 version |
| On-board cache | Two channels of DDR4,64-bit,capacity of each channel: 8GByte@1200MHz/s,512Mb Qspi Nor Flash |
| Loading Flash | One BPI x16 NorFlash,capacity 1Gb,used for system configuration program storage |
| High speed Interface | Two channel QSFP+,support 40Gbps transmission rate |
| Low speed interface | Supports 16 pairs of LVDS interfaces and 32 LVCOMS33 signals. One channel uart-Usb interface |
| Power supply | DC +12V±10%, 2.5A |
| Power consumption | 30W |
| Working temperature | Industrial -20℃ to +65℃ |